Interior Urethane Matt CHEMGLAZE Z151 Size 1/4 GL Clear

• Yurethane type for good quality interior from Chemglaze
• 100% tight adhesion, strong, durable, not fragile, easily broken. Stretch well.
• Specially thick film. Easy to make, beautiful, durable.
• Can prevent 100% water resistant to heat. And moisture.
• Able to withstand chemicals, acid-alkali in daily life.
• The film is clear. Helps to make the wood more beautiful.
• Received European standards. Dangerous metal, En71 European Standard
• Size 1/4 Gallon
• Clear colors

Technical data

• Application area/gallon : 40 - 45 sqm.
• Number of trips: 1 trip
• Diligence: Mixed with Keyls 9951 = 10%
• Thap: 4 hours but not more than 6 hours
• Dry duration: 2-4 hours

Surface preparation

1. Scrub the surface smoothly and clean the wood without stains, dust, powder and completely dry (if never applied or coated To scrub the old color first And in the case of wood, there is a groove or hole, should be used first. Wood Tech Woodfiller )
2. Leave to dry at least 2-4 hours, scrub the face to be smooth and clean.

Painting procedures

1. Apply Chemglaze 9934 Polyurethane, wooden foundation, number 1 trip without mixing thinner (In case of hardwood To mix with Claim Galez 9951 The garden rate is about 20%) should not be foundation by beating the flour and then covered with Challac. Or other types of foundation Because it will cause peeling.
2. Leave to dry at least 2-4 hours.

Paint the Tour Paint

1. Apply with chemglaze Z151 (clear color), 1 trip, 1 trip.
2. Leave to dry for at least 4 hours but should not exceed 24 hours and then rubbed with fine sandpaper (#240-360). Clean before continuing to travel.
3. Repeat in step 1 and 2 (of the foundation painting process) until the beautiful, shine of the film as needed. For good protection Should be applied at least 2 trips.

Note : The color of the product shown on the website There may be different from the color display settings of each screen.